Homepage

Why would you want a silicone sock? There are multiple big advantages for such a small upgrade. They keep the heatblock insulated, you don't want your heatblock and nozzle to...

Why would you want a silicone sock? There are multiple big advantages for such a small upgrade. They keep the heatblock insulated, you don't want your heatblock and nozzle to...

The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. The V2 socks are prone to tearing, but this...

Package contents:  1x USB extension cable (30cm) and 2 screws.  The printed parts can be bought in Prusa Orange and Jet Black PETG here:  --> FRONT VERSION MINI/FRONT VERSION MINI+ -->...

Do you want the easiest to use Prusa MINI? Then this is the perfect upgrade for you, no need to reach to the back of the printer to turn it...

This Bi-metal heatbreak solves heat-creap issues caused by the standard heatbreak on the Prusa Mini. The heatbreak is made from copper and titanium, this allows it to heat up less...

This thermistor uses the same sensor from Semitech as the one originally on the Prusa Mini for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini....

Do you want the easiest to use Prusa MINI? Then this is the perfect upgrade for you, no need to reach to the back of the printer to turn it...

Do you want the best linear bearings for your Prusa Mini(+), if so, you should get this kit and replace the current ones! While Prusa ships the MK3S+ with MISUMI...

This nozzle is compatible with the Prusa Mini and MK2/3(S)(+).The overall length is the same as a V6 nozzle, but the tip is a bit sharper than the standard V6 nozzle. ...

This nozzle is compatible with the Prusa Mini (+) and MK2/3(S)(+).The diameter tolerances are very high, resulting in better prints than with low-quality nozzles.  Package contents:  1x 0.4mm V6 Nozzle, Standard

This nozzle is compatible with the Prusa Mini and MK2/3(S)(+).The overall length is the same as a V6 nozzle, but the tip is a bit sharper than the standard V6 nozzle....

This heater cartridge is the same length as the original Prusa Mini cartridge and has bootlace ferrules to connect it to the screw terminal more reliably like the original cartridge. The heater...

This nozzle is compatible with the Prusa Mini (+) and MK2/3(S)(+).The diameter tolerances are very high, resulting in better prints than with low-quality nozzles.  Package contents:  1x 0.25mm V6 Nozzle, Standard

This Titanium heatbreak solves heat-creap issues caused by the standard heatbreak on the Prusa Mini! Package contents: 1x Titanium Heatbreak, for Prusa Mini (+)1x Thermal Paste, 0.5g1x PTFE tube The installation guide can...