website
Categories

    Slice Engineering Hotends and Accesoires

    Silicone Sock-X - for Mosquito Hotend

    $5.00 – $39.00

    The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. This new generation is made from a far superior material in a...

    Silicone Sock-X - for Copperhead Hotend

    $5.00 – $39.00

    The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. This new generation is made from a far superior material in a...

    Prusa Mini (+) Copperhead Hotend Upgrade Kit - Slice Engineering

    $104.00

    It's time to unlock the full power of your Prusa Mini (+), with the ubiquitous Copperhead®. We've built a reputation for outfitting 3D printers with premium engineering-grade components that drastically improve...

    Plastic Repellent Paint™ - Slice Engineering

    $16.00

    Achieve peak bridging performance with the BridgeMaster® Nozzle! The increased thermal conductivity of our copper alloy, carries heat efficiently all the way to the nozzle tip, enabling you to maximize part cooling, without...

    GammaMaster® V6 Nozzle - Slice Engineering

    $27.00

    The GammaMaster® Nozzle is the next evolution in nozzle technology, forged from the latest advancements in metallurgy and surface preparation technology. For too long, you have had to settle for...

    Boron Nitride Paste - Slice Engineering

    $11.00

    Boron Nitride Paste is a thermal agent used to increase conduction. It acts as a release agent and is not electrically conductive, which protects against the danger of short-circuiting the...

    Vanadium™ V6 Nozzle - Slice Engineering

    $27.00 – $34.00

    Hard to the Core - Slice Engineering's Vanadium Nozzles are hardened and tempered to 65 Rockwell C all the way through the substrate, not just on the surface.  Crafted from...

    Copperhead® Heat Break - C-E - Slice Engineering

    $35.00

    This Copperhead® Heat Break is compatible with most Creality printers (check compatibility here: Heat Break Configurator) Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep ...

    BridgeMaster® V6 Nozzle - 0.4mm - Slice Engineering

    $33.00$31.00

    Achieve peak bridging performance with the BridgeMaster® Nozzle! The increased thermal conductivity of our copper alloy, carries heat efficiently all the way to the nozzle tip, enabling you to maximize part cooling, without...

    Thermistor High Temperature - 300°C - Slice Engineering

    $31.00

    Eliminates the need for high-temperature RTD's or having two separate thermistors to maintain accuracy at both the low and high end of the temperature spectrum These are simply the highest-performing...

    RTD - Pt1000 - Slice Engineering

    $31.00

    Accurate from freeze-your-butt-off cold (-50°C) to instantly-boil-your-innards hot (500°C) Totally linear temperature response improves sensing accuracy across the range 15mm long. 3 mm diameter sensor cartridge  2m long bare leads...

    50W Heater Cartridge - 24V - Slice Engineering

    $21.00

    Pump more power into your 3D printer with a high power density 50W heater cartridge.  The Hardcore 321SS cartridge improves longevity and durability 22mm long Diameter sized to fit into...

    Hotend Cooling Fan - 24V - Slice Engineering

    $9.00

    High-quality 25mm box fan with dual Japanese bearings Molex Micro-Fit 3.0 connector Hotend cooling fan mounts directly to the Mosquito® Hotend, Mosquito® Magnum, or Copperhead® with included hardware 24V version Rated...

    Copperhead® Heat Break - G2 - Slice Engineering

    $32.00

    This Copperhead® Heat Break is the default Heat Break for the Copperhead® Hotend. Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep 

    Copperhead® Heat Break - P Mini - Slice Engineering

    $35.00

    This Copperhead® Heat Break is compatible with the Prusa Mini (+) Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep  Note: Slice Engineering®...

    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    January,February,March,April,May,June,July,August,September,October,November,December
    Not enough items available. Only [max] left.
    Shopping cart

    Your cart is empty.

    Return To Shop

    Add Order Note Edit Order Note
    Estimate Shipping
    Add A Coupon

    Estimate Shipping

    Add A Coupon

    Coupon code will work on checkout page