website
Categorieën

    Slice Engineering Hotends and Accesoires

    Prusa Mini (+) Copperhead Hotend Upgrade Kit - Slice Engineering

    €114,99

    It's time to unlock the full power of your Prusa Mini (+), with the ubiquitous Copperhead®. We've built a reputation for outfitting 3D printers with premium engineering-grade components that drastically improve...

    Copperhead® Heat Break - C-E - Slice Engineering

    €37,99

    This Copperhead® Heat Break is compatible with most Creality printers (check compatibility here: Heat Break Configurator) Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep ...

    Plastic Repellent Paint™ - Slice Engineering

    €17,50

    Achieve peak bridging performance with the BridgeMaster® Nozzle! The increased thermal conductivity of our copper alloy, carries heat efficiently all the way to the nozzle tip, enabling you to maximize part cooling, without...

    BridgeMaster® Nozzle - 0.4mm - Slice Engineering

    €35,99

    Achieve peak bridging performance with the BridgeMaster® Nozzle! The increased thermal conductivity of our copper alloy, carries heat efficiently all the way to the nozzle tip, enabling you to maximize part cooling, without...

    Thermistor High Temperature - 300°C - Slice Engineering

    €33,99

    Eliminates the need for high-temperature RTD's or having two separate thermistors to maintain accuracy at both the low and high end of the temperature spectrum These are simply the highest-performing...

    RTD - Pt1000 - Slice Engineering

    €33,99

    Accurate from freeze-your-butt-off cold (-50°C) to instantly-boil-your-innards hot (500°C) Totally linear temperature response improves sensing accuracy across the range 15mm long. 3 mm diameter sensor cartridge  2m long bare leads...

    50W Heater Cartridge - 24V - Slice Engineering

    €22,99

    Pump more power into your 3D printer with a high power density 50W heater cartridge.  The Hardcore 321SS cartridge improves longevity and durability 22mm long Diameter sized to fit into...

    Hotend Cooling Fan - 24V - Slice Engineering

    €8,99

    High-quality 25mm box fan with dual Japanese bearings Molex Micro-Fit 3.0 connector Hotend cooling fan mounts directly to the Mosquito® Hotend, Mosquito® Magnum, or Copperhead® with included hardware 24V version Rated...

    Copperhead® Heat Break - G2 - Slice Engineering

    €34,99

    This Copperhead® Heat Break is the default Heat Break for the Copperhead® Hotend. Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep 

    Copperhead® Heat Break - P Mini - Slice Engineering

    €37,99

    This Copperhead® Heat Break is compatible with the Prusa Mini (+) Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep  Note: Slice Engineering®...

    Copperhead® Hot Block - Slice Engineering

    €28,99

    Nickel-plated for superior longevity and reduced emissivity Copper alloy base material Distinctive laser marking Convenient wrench flats to simplify changing nozzles The Copperhead® Hot Block is available in one variant...

    Copperhead® Heat Sink - Screw Mount G2 - Slice Engineering

    €52,99

    Aircraft-grade aluminium heat sink Fits the Standard Copperhead® Heat Break Two variants available SEMI™ mount Groovemount For more documentation on the Copperhead® Heat Sink, please see the Copperhead® Hotend page.

    Vanadium™ Nozzle - 0.8mm - Slice Engineering

    €39,99

    Hard to the Core - Slice Engineering's Vanadium Nozzles are hardened and tempered to 65 Rockwell C all the way through the substrate, not just on the surface.  Crafted from...

    Vanadium™ Nozzle - 0.6mm - Slice Engineering

    €39,99

    Hard to the Core - Slice Engineering's Vanadium Nozzles are hardened and tempered to 65 Rockwell C all the way through the substrate, not just on the surface.  Crafted from...

    Vanadium™ Nozzle - 0.4mm - Slice Engineering

    €39,99

    Hard to the Core - Slice Engineering's Vanadium Nozzles are hardened and tempered to 65 Rockwell C all the way through the substrate, not just on the surface.  Crafted from...

    Zondag, maandag, dinsdag, woensdag, donderdag, vrijdag, zaterdag
    January,February,March,April,May,June,July,August,September,October,November,December
    Niet genoeg artikelen beschikbaar. Enkel en alleen [max] links.
    Winkelwagen

    Uw winkelwagen is leeg.

    Terug naar winkel

    Voeg bestellingsnotitie toe Bestellingsnotitie bewerken
    Schatting verzendkosten
    Voeg een coupon toe

    Schatting verzendkosten

    Voeg een coupon toe

    Couponcode werkt op de afrekenpagina