website
Categories

    Products

    4-Pack - Silicone Sock-X - for Revo Nozzle

    $5.00

    The new socks for Revo nozzles help keeping your nozzle clean, and lowering the convection heat from the nozzle to the printed part, slightly increasing the print quality. The socks...

    50W Heater Cartridge - 24V - Slice Engineering

    $21.00

    Pump more power into your 3D printer with a high power density 50W heater cartridge.  The Hardcore 321SS cartridge improves longevity and durability 22mm long Diameter sized to fit into...

    APUS EXTRUDER® - Pheatus - Black

    $83.00

    The APUS EXTRUDER®, is a lightweight, strong extruder. The gears are made from hardened steel, resulting in high wear resistance. The open frame makes the extruder easily accessible, and the hotend...

    Bi-metal Heatbreak - for Prusa Mini (+)

    $17.00 – $18.00

    This Bi-metal heatbreak solves heat creap issues caused by the standard heatbreak on the Prusa Mini. The heatbreak is made from copper and titanium, this allows it to heat up...

    Boron Nitride Paste - Slice Engineering

    $11.00

    Boron Nitride Paste is a thermal agent used to increase conduction. It acts as a release agent and is not electrically conductive, which protects against the danger of short-circuiting the...

    Brass Coupler Set - for Prusa Mini (+)

    $7.00

    This brass coupler is a drop-in replacement for the Prusa Mini (+). There are two brass compression olives, so you have a spare one.  Package contents: 2x Brass Compression Olive1x...

    Brass V6 Nozzle - Sharp

    $4.00

    This nozzle is compatible with the Prusa Mini (+), MK2/3(S)(+) and other printers with V6 (compatible) hotends.The overall length is the same as a V6 nozzle, but the tip is a...

    Brass V6 Nozzle - Standard

    $4.00 – $15.00

    This nozzle is compatible with the Prusa Mini (+), MK2/3(S)(+) and printers with V6 (compatible) hotends.The diameter tolerances are very high, resulting in better prints than low-quality nozzles.  Package contents:  1x...

    BridgeMaster® V6 Nozzle - 0.4mm - Slice Engineering

    $33.00$31.00

    Achieve peak bridging performance with the BridgeMaster® Nozzle! The increased thermal conductivity of our copper alloy, carries heat efficiently all the way to the nozzle tip, enabling you to maximize part cooling, without...

    Capricorn XS PTFE Tube - for Prusa Mini (+)

    $11.00

    If you want to print flexible materials, or just want to get the best performance possible out of your Prusa Mini, then this is a great upgrade to get. The...

    Copperhead® Heat Break - C-E - Slice Engineering

    $35.00

    This Copperhead® Heat Break is compatible with most Creality printers (check compatibility here: Heat Break Configurator) Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep ...

    Copperhead® Heat Break - G2 - Slice Engineering

    $32.00

    This Copperhead® Heat Break is the default Heat Break for the Copperhead® Hotend. Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep 

    Copperhead® Heat Break - P Mini - Slice Engineering

    $35.00

    This Copperhead® Heat Break is compatible with the Prusa Mini (+) Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep  Note: Slice Engineering®...

    Copperhead® Heat Sink - Screw Mount G2 - Slice Engineering

    $48.00

    Aircraft-grade aluminium heat sink Fits the Standard Copperhead® Heat Break Two variants available SEMI™ mount Groovemount For more documentation on the Copperhead® Heat Sink, please see the Copperhead® Hotend page.

    Copperhead® Hot Block - Slice Engineering

    $27.00

    Nickel-plated for superior longevity and reduced emissivity Copper alloy base material Distinctive laser marking Convenient wrench flats to simplify changing nozzles The Copperhead® Hot Block is available in one variant...

    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    January,February,March,April,May,June,July,August,September,October,November,December
    Not enough items available. Only [max] left.
    Shopping cart

    Your cart is empty.

    Return To Shop

    Add Order Note Edit Order Note
    Estimate Shipping
    Add A Coupon

    Estimate Shipping

    Add A Coupon

    Coupon code will work on checkout page